Dell S6000 - Show Run Vrf

show run vrf
Displays configuration information corresponding to all the VRFs in the system.
Syntax
show run vrf vrf-name
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF..
Command
Modes
• EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Introduced on the S-Series Z-Series.
Version 8.2.1.0 Introduced on the E-Series.
Usage
Information
Use this command to display configuration information corresponding to either a
specific VRF or all the VRFs in the system.
Example
Dell#show run vrf test3
!
ip vrf test3
description "Banking Customer Chennai"
Related
Commands
Virtual Routing and Forwarding (VRF)
1453