Dell S6000 - Show Hardware Stack-Unit Buffer-Stats-Snapshot

################# FP Entry for redirecting GVRP traffic to RSM
###########
EID 2044: gid=1,
slice=15, slice_idx=0x03, prio=0x7fc, flags=0x82, Installed
tcam: color_indep=0, higig=0, higig_mask=0,
KEY=0x00000000 00000000 00000000 0180c200 00210000 00000000
00000000
, FPF4=0x00
MASK=0x00000000 00000000 00000000 ffffffff ffff0000 00000000
00000000
, 0x00
action={act=Drop, param0=0(0x00), param1=0(0x00)},
action={act=CosQCpuNew, param0=7(0x07), param1=0(0x00)},
action={act=CopyToCpu, param0=0(0x00), param1=0(0x00)},
action={act=UpdateCounter, param0=1(0x01), param1=0(0x00)},
meter=NULL,
counter={idx=3, mode=0x01, entries=1}
################# FP Entry for redirecting ARP Replies to RSM
#############
EID 2043: gid=1,
slice=15, slice_idx=0x04, prio=0x7fb, flags=0x82, Installed
tcam: color_indep=0, higig=0, higig_mask=0,
KEY=0x00000000 00000000 00000000 00000000 00000000 00000806
00001600
, FPF4=0x00
MASK=0x00000000 00000000 00000000 00000000 00000000 0000ffff
00001600
, 0x00
action={act=Drop, param0=0(0x00), param1=0(0x00)},
action={act=CosQCpuNew, param0=6(0x06), param1=0(0x00)},
action={act=CopyToCpu, param0=0(0x00), param1=0(0x00)},
action={act=UpdateCounter, param0=1(0x01), param1=0(0x00)},
!--------- output truncated -----------------!
show hardware stack-unit buffer-stats-snapshot
View the buffer statistics tracking resource information without polling details and historical snapshots.
This command is supported on the S6000 platform.
Syntax
show hardware stack-unit 0 buffer-stats-snapshot unit 0
resource X
Parameters
stack-unit
number
Unique ID of the stack unit to select a particular stack
member and then enter one of the following command
options to display a collection of data based on the option
entered. The range is 0 to 11.
buffer-stats-
snapshot unit
number
Display the historical snapshot of buffer statistical values unit
Enter the keyword unit along with a port-pipe number,
then the keyword counters to display the counters on the
selected port-pipe. The range is 0 to 0.
port resource X Buffer and traffic manager resources usage,
where X can be one of the following:
• All - Ingress and Egress resources snapshots
Debugging and Diagnostics
521