Dell S6000 - Show Bootvar

show bootvar
Display boot configuration information.
S6000
Syntax show bootvar
Command
Modes
BOOT_USER
Command
History
Version 9.0.2.0 Introduced on the S6000.
Example
BOOT_USER # show bootvar
PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specified!
SECONDARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : flash
file name : systema (FTOS system://A Partition)
DEFAULT OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : tftp
file name : PS-SI-9-0-0-566.bin
Management Etherenet IP address : 10.16.133.17
Mask : 255.255.0.0
Server IP address : 10.16.1.200
Default Gateway IP address : 10.16.1.254
BOOT_USER #
Related
Commands
boot_change— Change the primary, secondary, or default boot image
configuration.
boot_zero — Erase the configured primary, secondary, or default boot image
parameters.
318
Boot Command Line Interface