Dell S6000 - Show Vxlan Vxlan-Instance Statistics Interface

Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Version 9.4.
(0.0)
Introduced on the S6000.
Example
Dell# show vxlan vxlan-instance <1> unicast-mac-local
Total Local Mac Count: 5
VNI MAC PORT VLAN
4656 00:00:02:00:03:00 Te 0/17 0
4656 00:00:02:00:03:01 Te 0/17 0
4656 00:00:02:00:03:02 Te 0/17 0
4656 00:00:02:00:03:03 Te 0/17 0
4656 00:00:02:00:03:04 Te 0/17 0
Related
Commands
vxlan-instance- Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance statistics interface
Displays the port VLAN statistics information related to Network Virtualization Overlay (NVO) Gateway.
S6000
Syntax
show vxlan vxlan-instance instance ID statisitics
interface interface
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the
instance ID 1 in the initial release.
interface Enter the following keywords and slot/port or number
information:
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information and then
followed by the Vlan ID. The Vlan ID ranges from 0 to
4095.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information,
and then followed by the Vlan ID. The Vlan ID ranges
from 0 to 4094.
• For a Port Channel, enter the keywords port-channel.
Defaults Disabled
Virtual Extensible LAN (VXLAN)
1489