Dell S6000 - Show Running-Config Vxlan

Related
Commands
vxlan-instance- Enable VXLAN Instance configuration on the platform.
show running-config vxlan
Displays the configuration information of the VXLAN on S6000.
S6000
Syntax
show running-config vxlan
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Version 9.4.
(0.0)
Introduced on the S6000.
Example
Dell#show running-config vxlan
!
feature vxlan
!
vxlan-instance 1
gateway-ip 3.3.3.3
fail-mode secure
controller 1 192.168.122.6 port 6632 ssl
no shutdown
Related
Commands
vxlan-instance- Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance unicast-mac-remote
Displays the information of the remote unicast MACs associated with the logical network related to
Network Virtualization Overlay (NVO) Gateway.
S6000
Syntax
show vxlan vxlan-instance instance ID unicast-mac-remote
[logical-network name | vnid VNID]
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the
instance ID 1 in the initial release.
Virtual Extensible LAN (VXLAN)
1487