Dell S6000 - Delete

In this copy scp: flash: example, specifying SCP in the first position indicates
that the target is to be specified in the ensuing prompts. Entering flash: in the
second position indicates that the target is the internal Flash. The source is on a
secure server running SSH, so you are prompted for the user datagram protocol
(UDP) port of the SSH server on the remote host.
Example
Dell#copy scp: flash:
Address or name of remote host []: 10.11.199.134
Port number of the server [22]: 99
Source file name []: test.cfg
User name to login remote host: admin
Password to login remote host:
Destination file name [test.cfg]: test1.cfg
Example
FTOS#copy compressed-config compressed-cfg
!
6655 bytes successfully copied
FTOS#
FTOS#copy compressed-config ftp:
Address or name of remote host []: 10.11.8.12
Destination file name [startup-config]:
User name to login remote host: spbalaji
Password to login remote host:
!
6655 bytes successfully copied
Related
Commands
cd – changes the working directory.
delete
Delete a file from the flash. After deletion, files cannot be restored.
S6000
Syntax
delete flash-url [no-confirm]
Parameters
flash-url Enter the following location and keywords:
• For a file or directory on the internal Flash, enter
flash:// followed by the filename or directory name.
• For a file or directory on an external USB drive, enter
usbflash:// followed by the filename or directory
name.
no-confirm (OPTIONAL) Enter the keyword no-confirm to specify that
Dell Networking OS does not require user input for each file
prior to deletion.
58
File Management