Dell S6000 - Page 443

Term Explanation
Portpipe Lists the portpipe (port-set) or port pipes (port-sets) that are
checked. Entering all shows the status for linecards and
port-pipes in the chassis.
CAM Partition Shows the CAM profile of the CAM.
Available CAM Identifies the amount of CAM space remaining for that
profile.
Estimated CAM
per Port
Estimates the amount of CAM space the listed policy will
require.
Status Indicates whether or not the policy will be allowed in the
CAM.
Example (S-
Series)
FTOS#test cam-usage service-policy input LauraIn stack-unit all
Stack-Unit|Portpipe|CAM Partition|AvailableCAM|EstimatedCAM
per Port|Status
---------------------------------------------------------------
---------
0| 0| IPv4Flow|
102| 0|Allowed
0| 1| IPv4Flow|
102| 0|Allowed
FTOS#
!
FTOS#test cam-usage service-policy input LauraIn stack-unit 0 port-
set 1
Stack-Unit|Portpipe|CAM Partition|Available CAM|EstimatedCAM
per Port|Status
---------------------------------------------------------------
-----------
0| 1| IPv4Flow|
102| 0|Allowed
FTOS#
Content Addressable Memory (CAM)
443