79
Installation and Operation Manual for RPI M50A
8 Settings
79
Installation and Operation Manual for RPI M50A
8. To change the parameter value, use the buttons and .
To conrm your setting, press the button
ENT
.
To cancel the action, press the button
ESC
.
9. Repeat steps 7 to 8 for other parameters if you need to change them.
Congurable Parameters
Parameter Description
Mode
Switches the function on and off.
Fix Q
Sets up a constant reactive power which is set in per cent of the nominal apparent
power S
n
.
Do not change this setting without prior
consultation with Delta Solar Support.
To Next Page
Loading...
