Denon AVC-A11XV Service Manual (English)

Other manuals for Denon AVC-A11XV

Questions and Answers:

Y
ycarterAug 18, 2025
What to do if my Denon Amplifier display is lit but no sound is produced?
- M
  Mrs. Marilyn RiveraAug 18, 2025
  If your Denon Amplifier's display is lit but you're not getting any sound, here are a few things to check: * Ensure the speaker cables are securely connected. * Verify that the FUNCTION knob is in the correct position. * Increase the volume level if it is set to minimum. * Deactivate MUTING if it's on. * Confirm that a digital signal is being input and properly select a digital signal input source.
A
Amy SimmonsAug 20, 2025
Why does my Denon AVC-A11XV Amplifier power off and the power indicator flashes red?
- M
  michaelriveraAug 21, 2025
  If your Denon Amplifier turns off and the power indicator flashes red, it could be due to a few reasons: * The internal temperature may have risen, activating the protection circuit. Ensure the unit is in a well-ventilated area. * The speaker wires might be touching each other or the rear panel, triggering the protection circuit. Check all speaker cord connections. * The Amplifier might be malfunctioning. In this case, turn off the power and contact a DENON customer service center.
C
Connor CookeAug 23, 2025
What to do if no sound is produced from surround speakers on my Denon AVC-A11XV?
- M
  Michelle McdanielAug 23, 2025
  If you're not getting any sound from the surround speakers on your Denon Amplifier, check if the surround mode is set to “STEREO”. If it is, set it to a mode other than “STEREO”.
B
Brooke MillerAug 26, 2025
How to fix no image with HDMI/DVI-D connection on Denon AVC-A11XV Amplifier?
- T
  Theresa MclaughlinAug 26, 2025
  If you're not getting an image with an HDMI/DVI-D connection on your Denon Amplifier, consider the following: * Check that the HDMI output terminals of the Amplifier and the input terminals of your monitor are properly connected. * Ensure that you've selected the correct HDMI or DVI-D signal input source. * Verify that the connected monitor equipment supports HDCP, as the Amplifier will not output video signal otherwise. * Confirm that the output format of the connected player matches the supported input format of your monitor.
C
Christine HoustonAug 28, 2025
How to troubleshoot no sound from the subwoofer on my Denon AVC-A11XV?
- L
  Lisa WolfAug 28, 2025
  If you're not getting any sound from the subwoofer connected to your Denon Amplifier, check these things: * Make sure the subwoofer is powered on. * Verify that the subwoofer's initial setting is set to “YES”. * Ensure the subwoofer's output is properly connected. * Check that the subwoofer’s channel volume level is not set to “OFF” and turn the subwoofer’s channel volume level up.
R
Richard MarshallAug 30, 2025
What to do if nothing is displayed on the monitor connected to my Denon AVC-A11XV?
- M
  mary50Aug 30, 2025
  If nothing is displayed on the monitor connected to your Denon Amplifier, try the following: * Check that the Amplifier's video output terminals and the monitor's input terminals are correctly connected. * Ensure that the monitor TV’s input setting is set to the correct terminals to which the video signals are connected. * Make sure that the PURE DIRECT mode is not activated; set a surround mode other than the PURE DIRECT mode.
B
Brian JohnsonSep 2, 2025
Why is HDMI audio not outputting on my Denon AVC-A11XV Amplifier?
- M
  Matthew ArcherSep 2, 2025
  If HDMI audio is not being outputted on your Denon Amplifier: * Ensure that the HDMI audio playback setting at the “HDMI/DVI In Assign” settings is set to “AMP.” * If you want the audio to play through the connected monitor, set the HDMI audio playback setting at the “HDMI/DVI In Assign” settings to “TV.”
P
perkinssusanSep 4, 2025
How do I fix no DTS sound on my Denon AVC-A11XV Amplifier?
- S
  sarah10Sep 4, 2025
  If you're not getting any DTS sound from your Denon Amplifier, here are a few things to check: * Make sure the DVD player’s audio output setting is set to bitstream by checking the DVD player’s initial settings. * Confirm that your DVD player is DTS-compatible; if not, use a DTS-compatible player. * Ensure that the Amplifier’s input setting is set to AUTO or DTS, not analog.
J
Jade BeckSep 7, 2025
What causes no test tones to be produced on a Denon Amplifier?
- J
  Jennifer BowersSep 7, 2025
  If no test tones are being produced by your Denon Amplifier, it may be because the surround mode is set to a mode other than Dolby Surround. Set the surround mode to Dolby Surround.
E
Emily MckeeSep 9, 2025
Why is sound only produced from the center speaker on my Denon AVC-A11XV?
- B
  bensondianeSep 9, 2025
  If sound is only coming from the center speaker on your Denon Amplifier, it's likely because you are playing a monaural source (like TV or AM radio) in DOLBY/DTS SURROUND or HOME THX CINEMA mode. When playing monaural sources, select a surround mode other than DOLBY/DTS SURROUND or HOME THX CINEMA.