Digi CM 8 User Manual

Overview User groups
Digi CM User Guide 12
User groups
The Digi CM unit comes with four built-in user groups pre-defined by roles or access levels. The
following table lists the four user groups, their access rights, and default user names. The Digi CM
unit supports access lists for user privileges. These lists can contain multiple users and define
specific port rights. If e.g. you have multiple people responsible for the Sun Servers in your company
and you want to give them identical access rights you can create a "Sun-admin" access list. Assign
this access list rights to every port that is attached to a Sun Server and add all the Sun
administrators to the "Sun-admin" Access List.
Root and admin usernames and passwords
The Digi CM unit comes with two default users; root and system admin. The user names of the the
Digi CM unit are case sensitive.
Adding port administrators and users
The system administrator and root user can add port administrators and additional users easily
with the web interface by choosing System administration > User administration > Add user.
Access lists
Multiple users can be defined within Access lists with access privileges or restrictions to the ports.
See Add an Access List to the Digi CM Unit for more information.
Ways to configure the Digi CM
This section discusses the three ways to configure the Digi CM unit using the web interface,
configuration menu, or command line interface.
Group Access Privileges
Configuration
Privileges
Defaults
----------- Ports Command Line Ports System Login Password
Root yes yes yes yes root dbps
System Admin yes yes
(read only)
yes yes admin admin
Port Admin yes no yes no - -
User yes no no no - -
User name Default password
root dbps
admin admin

Digi CM 8 Specifications

General

Brand	Digi
Model	CM 8
Category	Network Hardware
Language	English