Configure virtual KVM Use Virtual KVM with VNC protocol
Digi CM User Guide 99
This login screen opens:
3 Enter your user name and password, and then click OK.
If the application does not start, check to make sure that the application is in the search path on
your server. See Install programs for Virtual KVM.
Use Virtual KVM with VNC protocol
This section describes how to:
▪ Configure Virtual KVM with VNC Protocol
▪ Connect to a system through Virtual KVM using VNC Protocol
Configure
To configure Virtual KVM with VNC protocol, follow this procedure:
1 Access the Digi Passport Web interface and log in.
2 Choose Serial Port > Configuration.
This window opens:
To Next Page
Loading...
