Configure virtual KVM Use Virtual KVM with Remote Desktop protocol
Digi CM User Guide 96
Use Virtual KVM with Remote Desktop protocol
This section describes how to:
▪ Configure Virtual KVM with Remote Desktop Protocol
▪ Connect to a system through Virtual KVM using Remote Desktop Protocol
Configure
To set up Virtual KVM with Remote Desktop protocol, follow this procedure:
1 Access the Digi Passport Web interface and log in.
2 Choose Serial Port > Configuration.
This window opens:
3 Choose the port you want to configure, and then select the Virtual KVM tab. (In this example, port
1 is selected.)
A window similar to this one opens, showing the serial port number and title:
To Next Page
Loading...
