Digi CM 8 User Manual

Install and configure PC cards Introduction
Digi CM User Guide 28
Introduction
This section includes information on adding and configuring PC cards for the Digi CM unit. PC card
devices that can be added to the the Digi CM unit include a serial modem, compact-flash card,
wireless LAN card, and a network LAN card.
Compatible PC cards
All compact-flash cards work with the Digi CM unit, but not all serial modem, wireless LAN, or regular
LAN cards do. To see a list of compatible cards that have been tested with the Digi CM unit, visit the
Digi support site at digi.com/products/consoleservers/digicm#productsupport.
Add a compact-flash card
A PC card slot is located on the front panel of the Digi CM unit. The arrow in the following graphic
indicates the PC card slot.
To install and configure the compact-flash card on the Digi CM unit, do the following.
1 Insert the card into the PC card slot.
2 Access the web interface.
3 Under the PC card heading click Configuration.
Note Always select the Stop card service button and Save & apply before removing the PC card.
4 Click Configure the detected card.
The following fields appear on the configuration page:

Digi CM 8 Specifications

General

Brand	Digi
Model	CM 8
Category	Network Hardware
Language	English