Configuration menu Port parameters
Digi CM User Guide 158
3 Enter the desired parameters for each menu item.
4 Use the ESC key when all parameters are entered to return to the main menu.
5 Choose Save changes.
Port parameters
1 Access the configuration menu.
2 Choose Serial Port Configuration > an individual port number or 0 (zero) for all ports.
3 Enter the desired parameters for each menu item.
4 Use the ESC key when all parameters are entered to return to the main menu.
5 Choose Save changes.
Port Access Menu
Another default menu is the Port Access Menu, which is available to all users.
1 Access Configuration menu
2 Select Serial Port Configuration.
3 Select 0 for all ports.
4 Select Port access menu configuration.
To Next Page
Loading...
