Digi CM 8 - Assign a port name; Access the Rackable Systems Management Card from the Digi CM Units User Interface

Rackable Systems management card Setup the Digi CM Unit to support the Rackable Systems management card
Digi CM User Guide 111
3 Click Save & apply.
Assign a port name
1 Choose port title from the menu.
2 Enter a port title.
3 Click Save & apply.
Access the Rackable Systems Management Card from the Digi CM
Unit’s User Interface
1 Access the Digi CM unit’s web interface.
2 Under the Serial Port heading choose Connection.
A screen similar to the following appears.
3 Click on the icon in the M (Manage) column or on the title of the port to which the Rackable
Server is connected.
A screen similar to the following appears.
4 Use the Digi CM unit’s user interface to perform Rackable Systems Management Card functions.
The following describes attributes of the user interface controls.