Custom and default menus Make custom menus
Digi CM User Guide 85
Add menu items
Once you have defined a menu name and added users, you can then add menu items. To add menu
items, do the following:
1Custom Menu > Configuration > Menu Name hyperlink for the menu you want to configure.
2 Choose Menu Items > Add Item.
The following screen appears.
3 Fill in the desired parameters. The parameters are:
Key - Assign any letter or number except a value already used by another menu item.
Label - Assign a label or name for the menu item.
Create new submenu - Assign a name for a new submenu that this menu item will be assigned
or linked to.
Go to existing submenu - Choose an existing submenu from the drop down menu that this
menu item will be assigned or linked to.
Connect to serial port - Connects you to a specified port.
Connect to clustered serial port - Connects you to a clustered port.
Telnet to a remote host - Enter a remote host’s IP address or hostname.
SSH (Secure Shell) to a remote host - Enter the hostname or IP address of a remote host and
the remote username.
Execute a custom command - Enter a customized command that is any valid command on the
command line with acceptable user privileges.
4 Choose Apply.
5 Repeat this procedure to add more menu items.
To Next Page
Loading...
