Digi CM 8 - Introduction; Hardware specifications; Digi CM 48

Hardware information Introduction
Digi CM User Guide 178
Introduction
This section provides information on Digi CM hardware. Among the topics covered are the hardware
specifications, LED descriptions, pinouts for the Ethernet cable, pinouts for the cable adapters, and
rack mounting specifications.
Hardware specifications
Digi CM 48
Attribute
Value
AC Powered
Value
DC Powered
Operating
temperature
40°F to 120°F (5°C to 50°C) 40°F to 120°F (5°C to 50°C)
Storage
temperature
-20°F to 140°F (-29°C to 60°C) -20°F to 140°F (-29°C to 60°C)
Humidity 10% to 90% non-condensing 10% to 90% non-condensing
Power supply Internal, 100 -240VAC, 50/60 Hz, 1.2A
(max)
Internal, 36 - 72 Vdc, 1.2A (max)
Power
consumption
0.37A /120VAC, 45W (typical), 150W
(max)
0.4A /48Vdc, 19W (typical), 40W (max)
Fuse (internal) FUSE (Type L) AC250V, 2A Fuse (Type L) 250V, 5A
Operating
system
Linux Hard Hat embedded Linux Hard Hat embedded
SDRAM 256 megabytes 256 megabytes
Flash memory 16 megabytes 16 megabytes
Dimensions:
unpackaged
17.5” x 10.0” x 1.75”
(44.5 x 25.4 x 4.5 cm)
17.5” x 10.0” x 1.75”
(44.5 x 25.4 x 4.5 cm)
Dimensions:
packaged
20.375” x 15.25” x 4.75 (517.5 mm
387.3 mm x 120.6 mm)
20.375” x 15.25” x 4.75 (517.5 mm
387.3 mm x 120.6 mm)
Weight:
unpackaged
6.5 lbs (2.95 kg) 6.7 lbs (3.05 kg)
Weight:
packaged
9.95 lbs (4.51 kg) 10.2 lbs (4.61 kg)