Configuration menu Authentication
Digi CM User Guide 165
Authentication
1 Access the configuration menu.
2 Choose Serial port configuration.
3 Choose an individual port number or 0 (zero) for all ports > Authentication.
4 Choose Authentication type.
5 Use the ESC key to return to the main menu.
6 Choose Save changes.
r reboot device using power-switch only if power management is available on
this port
p power device on/off (show only on or off) only if power
management is available on this port
x close current connection to port closes the sniff session connection
Escape
sequence
Ctrl+
Description of action Occurrence
To Next Page
Loading...
