Custom and default menus Default menu
Digi CM User Guide 86
Note To add or configure submenus, select the Submenus hyperlink on the Menu Configuration
page.
Assign users to a menu
Once a menu has been created, users can be assigned to the menu by doing the following:
1 Access the web interface.
2 Configuration > Custom Menu > Menu Users.
A list of available users is displayed.
3 Choose a menu for a user by selecting a menu from the drop down Assigned Menu list.
4 Choose Save & apply.
Default menu
Port Access menu
The Port Access menu is a flat (one level) menu showing all ports, port titles and the mode of each
port.
Using the Port Access menu you have a complete overview of all ports and can initiate a connection
to any of them.
When you choose to connect to a specific port, you are prompted again for the username and
password.
There are multiple ways to access the PortAccess menu:
▪ Assigned IP address (see Configure host mode)
▪ TCP/IP port 7000
To Next Page
Loading...
