Digi CM 8 - Page 149

Command line interface Important file locations
Digi CM User Guide 149
client.pem Web certificate
./cluster/cluster.conf Cluster “Master” port information
./cluster/unit#.conf Cluster “Slave” port information
.cnfversion Version of current configuration. Used for TFTP update only
dhcpd.opt DHCPD information
ez-ipupdate.conf “Dynamic DNS” information for IP assigning
group User group information
host.cnf Host name look up order
hosts Host name table
interfaces Basic loopback (lo) and ethernet interface (eth0) information (IP, gateway,
etc.)
krb5.conf Kerberos information
./keywords Keywords for alert configuration
./menu All custom menu information, .xml files
pap-secrets PAP auth via PPPoE
passive.detect Passive auto detection of serial devices
passwd User password file
./power/power.cnf Power management configuration
pppoe.conf Config file for PPPoE
redirect.cnf Basic port and portaccessmenu config information
resolv.conf DNS information
server.pem Private key for SSH with key certification information
shadow Secure password file
snmpd.conf SNMP information
./.ssh Directory for SSH information
system.cnf Basic network config information (IP, gateway, etc.)
timezone Time zone configuration
./.usracctl Directory containing user access control information
version Firmware version
File name Description