Regulatory information FCC (United States)
XBee®/XBee-PRO SX RF Module User Guide
183
Increase the separation between the equipment and receiver, Connect equipment and receiver to
outlets on different circuits, or Consult the dealer or an experienced radio/TV technician for help.
FCC antenna certifications
WARNING! This device has been tested with the antennas listed in the tables of this
section. When integrated into products, fixed antennas require installation preventing
end users from replacing them with non-approved antennas. Antennas not listed in the
tables must be tested to comply with FCC Section 15.203 (unique antenna connectors)
and Section 15.247 (emissions).
Fixed base station and mobile applications
Digi devices are pre-FCC approved for use in fixed base station and mobile applications. When the
antenna is mounted at least 34 cm from nearby persons, the application is considered a mobile
application.
Portable applications and SAR testing
When the antenna is mounted closer than 34 cm to nearby persons, then the application is considered
"portable" and requires an additional test be performed on the final product. This test is called
Specific Absorption Rate (SAR) testing and measures the emissions from the device and how they
affect the person.
RF exposure statement
This statement must be included as a CAUTION statement in integrator product manuals.
WARNING! This equipment is approved only for mobile and base station transmitting
devices. Antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 34 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
To Next Page
Loading...
Need help?
General
