Digi XBee SX - D9 (Dio9;On_Sleep); P0 (DIO10;RSSI;PWM0 Configuration)

AT commands I/O settings commands
XBee®/XBee-PRO SX RF Module User Guide
89
Parameter Description
0 Disabled
1 N/A
2 N/A
3 Digital input
4 Digital output, low
5 Digital output, high
Default
1
D9 (DIO9/ON_SLEEP)
Sets or displays the DIO9/ON_SLEEP configuration (pin 26).
Parameter range
0, 1, 3 - 5
Parameter Description
0 Disabled
1
ON/SLEEP output
2 N/A
3 Digital input
4 Digital output, low
5 Digital output, high
Default
1
P0 (DIO10/RSSI/PWM0 Configuration)
Sets or displays the PWM0/RSSI/DIO10 configuration (pin 7).
When configured as a PWM output, you can use M0 to set the PWM duty cycle.
Parameter range
0 - 5
Parameter Description
0 Disabled