Dinstar MTG2000 - PSTN -> PSTN Caller

MTG2000 Trunk Gateway User Manual V| Dinstar
95
Parameter
Explanation
Index
The index of this PSTN -> PSTN callee number manipulation,
from 0 to 511. Each index cannot be used repeatedly.
Description
The description of this PSTN-> PSTN callee number
manipulation
PSTN Group
Select a PSTN group. The callee number will be manipulated
when a call uses a trunk of this PSTN group, actual callee
prefix matches the set callee prefix, and actual caller prefix
matches the set caller prefix.
‘Any’ means any PSTN group.
Callee Prefix
Set a prefix for the callee number.
Caller Prefix
Set a prefix for the caller number.
Number of Digits to
Strip from Left
The number of digits which are lessened from the left of the
callee number.
Number of Digits to
Strip from Right
The number of digits which are lessened from the right of the
callee number.
Prefix to be added
The prefix added to the callee number after its digits are
lessened.
Suffix to be added
The suffix added to the callee number after its digits are
lessened.
Number of Digits to
Reserve from Right
The number of the retained digits which. are counted from the
right of the callee number.
Number Type
The type of the callee number. Options include ‘Not Config’,
‘International’, ‘National’, ‘Unknown’, ‘Network Specific’,
‘Subscriber’ and ‘Abbreviated’.
4.14.4 PSTN -> PSTN Caller
On the PSTN -> PSTN Caller interface, you can set rules to change the actual caller number
during PSTN -> PSTN calling process.
Click Add, and the following interface will be displayed.