Dinstar MTG2000 - Call Routing; Routing Parameter; PSTN -> IP Routing

MTG2000 Trunk Gateway User Manual V| Dinstar
86
4.13 Call Routing
This menu manages the routing direction of calls. Call routing is mainly responsible for the call
routing parameters from IP to PSTN and from PSTN to IP.
Its submenu parameters include basic routing parameters, PSTN->IP call routing,
PSTN->PSTN call routing, and IP->PSTN call routing. Other binding rules set in call routing
help users to flexibly control the call service in a certain direction. Users need to understand
different PSTN ports and corresponding SIP trunk parameters when configuring call routing,
otherwise there may be call failure.
4.13.1 Routing Parameter
Belong To
Parameter
Explanation
Incoming Calls
from IP
Routing Priority
There are two options:
First IP ->PSTN, then IP ->IP
First IP ->IP, then IP ->PSTN
Routing &
Manipulation
There are two options:
Routing before Manipulation
Routing after Manipulation
Incoming Calls
from PSTN
Routing Priority
First PSTN ->IP, then PSTN ->PSTN
Routing &
Manipulation
There are two options:
Routing before Manipulation
Routing after Manipulation
4.13.2 PSTN -> IP Routing
On the PSTN -> IP Routing interface, you can set routing parameters for PSTN -> IP calls.