Dinstar MTG2000 - IP -> PSTN Routing

MTG2000 Trunk Gateway User Manual V| Dinstar
89
4.13.4 IP -> PSTN Routing
On the PSTN -> IP Routing interface, you can set routing parameters for IP -> PSTN calls.
Click Add, and the following interface will be displayed.
Parameter
Explanation
Index
The Index of the IP -> PSTN route, from 0 to 255. Greater
index value, higher priority for the route.
Description
The description of the IP -> PSTN route,
Source Type
Sources include IP group and IP trunk.
Trunk Type
If source is IP trunk, please select a specific SIP trunk. If
‘Any’ is selected, it means the source is any IP trunk. .
Callee Prefix
The prefix configured for callee number. When a callee
number matches the prefix, this IP -> PSTN route will be
used.
‘.’ is a wildcard, which means this IP -> PSTN route will be
used, no matter what the callee number is.
Caller Prefix
The prefix configured for caller number. When a caller
number matches the prefix, this IP -> PSTN route will be
used.
‘.’ is a wildcard, which means this IP -> PSTN route will be
used, no matter what the caller number is.
Destination Type
Destination is PSTN group or PRI/SS7/R2 trunk.
Destination IP Group
If source is PSTN group, please select a specific PSTN group.
IP Trunk No.
If source is PRI/SS7/R2 trunk, please select a specific
PRI/SS7/R2 trunk.
Number Filter Profile
ID
The ID of filter profile. The white lists and black lists set in
the filter profile will apply to this PSTN -> PSTN route.