Dinstar MTG2000 - R2 Trunk

MTG2000 Trunk Gateway User Manual V| Dinstar
53
Call without charge
Configure inter-register signaling for the line type of call
without charge
Group C (for Mexico)
Request Next ANI
After switching to group C, the callee sends the signaling
request to the next called number
Request All DNIS
and change to
Group A
Request all called numbers and go to group A to send the
signaling
Address Complete
After sending the calling and called numbers, the called party
sends the signaling request to group II
Network Congestion
Send this signaling when there is network congestion
Request next DNIS
and change back to
Group A
Request the previous called number and forward back to
group A to send the signaling
Request Last DNIS
and change back to
Group A
Request the last called number and forward back to group A to
send the signaling
4.8.2 R2 Trunk
Parameter
Explanation
E1 Port No.
E1 port number not yet configured
Protocol Param
Configured R2 protocol parameters