Dinstar MTG2000 - Pri Config; PRI Parameter

MTG2000 Trunk Gateway User Manual V| Dinstar
34
4.6 PRI Config
This menu manages the parameters related to the PRI. Before using the PRI, users need to check
whether the parameters match those of the remote end. Incorrectly matched parameters can cause
signaling or voice problems. The PRI parameters include the call number attribute settings and
other transmission settings, as well as the PRI D-channel settings, protocol type and interface
parameter attributes for each ports, which can cause signaling problems with PRI if the
parameters are incorrectly set.
4.6.1 PRI Parameter
Configure PRI parameters according to actual data which are provided by telecom operators.
Parameter
Options
Calling Party Numbering
Plan
Include ‘ISDN/Telephony Numbering Plan’, ‘Data
Numbering Plan’, ‘Telex Numbering Plan’, ‘National
Standard Numbering Plan’, ‘Private Numbering Plan’
and ‘Unknown’.
Calling Party Number Type
Include ‘International Number’, ‘National Number’,
‘Network Specific Number’, ‘Subscriber Number’,
‘Abbreviated Number’ and ‘Unknown’.
Screening Indicator for
Displaying Caller Number
Include ‘User-provided, not screened’, ‘User-provided,
verified and passed’, ‘User-provided, verified and