MTG2000 Trunk Gateway User Manual V| Dinstar
15
4 Configurations on Web Interface
4.1 How to Log in Web Interface
4.1.1 Network Connection
Connect MTG2000 to the network according to the following network topology:
4.1.2 Preparations for Login
Modify the IP address of the PC to make it at the same network segment with the IP address
of GE1 port of MTG2000. The format of PC IP is 192.168.1.XXX, since the default IP of
GE1 port is 192.168.1.111.
Check the connectivity between the PC and the MTG2000. Click Start-> Run of PC and
enter cmd to execute ‘ping 192.168.1.111’ to check whether the IP address of the MTG2000
runs normally.
4.1.3 Log in Web Interface
Open a web browser and enter the IP address of GE0 of MTG2000 (the default IP is
192.168.11.1). Then the login GUI will be displayed. Enter the correct username and
password. By default, username and password are as below:
User Name: admin
Password: admin@123#
It is suggested that you should modify the username and password for security
consideration on the Maintenance -> Password Modification interface.
Login GUI:
To Next Page
Loading...
