Dinstar MTG2000 - SS7 Link Set; SS7 CIC Maintain

MTG2000 Trunk Gateway User Manual V| Dinstar
44
4.7.5 SS7 Link Set
Two signaling points (SSP，SCP and STP）are connected by a MTP link or links. Those
links can be grouped into a set. In a link set, the first MTP link has the highest priority.
When the first MTP link is faulty, the next link in the set will be chosen.
Parameter
Explanation
Link Set No.
The No. of the SS7 link set. There are 8 link set allowed (from 0 to
7).
MTP Link No.
The No. of MTP link that has been configured.
4.7.6 SS7 CIC Maintain
There are two objects to be maintained for SS7 CIC, namely E1/T1 ports and channels.
Select E1/T1 on the right of Operation Mode, and the following interface will be displayed.
Parameters
Explanation
Operation Mode
E1/T1