Dinstar MTG2000 - Page 47

MTG2000 Trunk Gateway User Manual V| Dinstar
41
Parameter
Explanation
No.
Trunk No.
The No. of the SS7 trunk
Link No.
Each SS7 trunk supports two links which share the loading
equally. If one link malfunctions, the other link will
automatically bear all the loading until the faulty link is restored.
Signaling Link
Code
If the Link No. of the trunk cannot match with that of the peer
device, the SS7 trunk will be linked to the peer device according
to signaling link code.
E1/T1 Port No.
The No. of E1/T1 port linked to the SS7 trunk
Channel No.
The No. of the channel under which signal is transmitted.
Default value is 16.
Caller Type
The type of the caller number. Options include ‘Not
Configured’, ‘Subscriber’, ‘International” and “National’.
Callee Type
The type of the called number. Options include ‘Not
Configured’, ‘Subscriber’, ‘International” and ‘National’.
OrgCallee Type
The type of the original called number in case of number
manipulation. Options include ‘Not Configured’, ‘Subscriber’,
‘International’ and ‘National’.
Numbering Plan
Options include ‘ISDN’, ‘Data’, ‘Telex’ and ‘Private’.
Calling
Presentation
If ‘Allowed’ is selected, the calling number will be presented.
If ‘Restricted’ is selected, the calling number will not be
presented.
If ‘Not Config’ is selected, the parameter does not work.