Dinstar MTG2000 - Page 83

MTG2000 Trunk Gateway User Manual V| Dinstar
77
Description about add of SIP accounts：
Parameter
Explanation
SIP Account ID
SIP account ID, between 0-999
Description
Describe the SIP account
Binding PSTN
Group
Access mode, configured PSTN group call, the number in the
contact header of the invite message sent by the device is the SIP
account bound to the PSTN, not the original calling number, nor
the SIP account polling, only in pstn -> ip routing direction.
SIP Trunk No.
Corresponding to the SIP trunk number
Username
SIP registered user name
Authentication ID
The authentication ID of the SIP account configured by the SIP
server, which can be empty.
Password
Password for registering SIP account
Confirm Password
Enter confirm password
Expire Time
SIP registration interval
Max Calls
The device will reject calls that exceed the number of
concurrent.
Binding SIP Trunk
whether or not to bind SIP trunk.
Binding SIP Trunk
No.
Select the SIP trunk to be bound.
Enable Account
The enabled SIP account can be registered and called normally
Description about batch add of SIP accounts：
Parameter
Explanation
Start SIP Account
ID
The first SIP account number, subsequent SIP accounts are
incremented.
SIP Trunk No.
SIP trunk number
Username Prefix
The common prefix of the SIP accounts added in batches,
which can be empty.
Start Username
The first SIP account registered user name, subsequent SIP
accounts are incremented.
Authenticate ID
The authentication ID of the SIP account configured by the SIP
server, which can be empty.
Auth ID Add Prefix
Whether to add the user name prefix before the authentication
ID.
Account Count
The number of SIP accounts that can be added in batches.
Password Policy
Choose a password policy (Life Password/ The same with
username)
Password
Configure when the password policy is a universal password