Distech Controls ECLYPSE APEX User Manual

64 ECLYPSE APEX
5. Click Next. The Welcome Page screen is displayed allowing you to define the user’s landing page
that will be displayed when they login to the controller.
Figure51: User Details - Welcome Page
6. Enter the URL of the web page you want to define as the landing page. The URL is the one found
after the controllers' IP address or hostname. This should be copied from your Web browser’s ad-
dress bar when you have navigated to the target page.
For example if the address for the user default web page is HOSTNAME/eclypse/envysion/in-
dex.html OR 192.168.0.10/#/bacnet.html, remove the hostname or IP Address so that the URL
becomes /eclypse/envysion/index.html, or /#/bacnet.
7. Click OK, and because authentication is required, enter your username and password.
The edit icon is used to edit a user’s information. When editing user information, the user password is not
shown therefore the field appears empty. You can leave the password as is or assign a new one.
Defining a User Welcome Page in Client Mode
In Client mode, you can only add a Welcome page to your user considering that the rest of the data is
stored on the Server, essentially the credentials and roles (see Adding a User in Server Mode). This
user’s Welcome page however will have priority over the page defined in the Server mode.
Figure52: Adding a User in Client Mode
ECLYPSE Web Interface

Distech Controls ECLYPSE APEX Specifications

General

Brand	Distech Controls
Model	ECLYPSE APEX
Category	Control Systems
Language	English