92 ECLYPSE APEX
Importing a Backup from your PC or USB Key
The Importing a Backup from your PC functionality guides you through a series of well-defined steps
to easily import and restore a backup located on a USB drive plugged directly to the controller, or your
PC.
1. In the Backup & Restore main screen, click Import a Backup From PC. The restore options are
displayed.
2. In the Select Backup File section select the upload target, either the Device (controller) or USB
Key. Click Select File to select the backup file (.ecybackup) you wish to restore or drag and drop
the backup file in the dotted area. Click Next.
If no USB key is plugged in, the
USB key
option is grayed out. At this point you can insert a USB key but remember to
refresh in order to make the option available.
3. In the Features section, select the data you wish to backup and click Next.
ECLYPSE Web Interface