To Next Page

To Previous Page

①

②

③

Figure 14

Once part ① and part ② are connected, the Anti-drop Kit cannot be disconnected and reused.

Micro-SD Slot

With flight battery powered off, make sure the Micro-SD card is inserted correctly into the Micro-SD Slot before

taking any photos or recording any video.

Figure 15

The Phantom 2 Vision+ comes with a 4GB Micro-SD card and can support cards up to 32GB. The DJI VISION App

may not be able to read some Micro-SD cards. Using the DJI VISION App to reformat new Micro-SD cards is

recommended.

Refer to Format Micro-SD Card (Page 56) for details.

Do not insert or remove Micro-SD card when flight battery is powered on.

Gimbal Error Warning

Before the aircraft takes off, if a gimbal motor error is detected or the gimbal clamp is not removed, there will be a

warning prompt on the camera page of the DJI VISION App. This will disappear after the problem is resolved.

Questions and Answers:

Need help?

Do you have a question about the dji PHANTOM 2 VISION+ and is the answer not in the manual?

dji PHANTOM 2 VISION+ Specifications

General