©2014 DJI. All Rights Reserved.
[5] Parameter Unit
Select imperial or metric units of measurement.
[6] FPV Mode
Switched on, the gimbal will work in FPV mode. Switched off, the gimbal will work in Stabilize mode.
[7] Auto Flips
The user interface of the DJI VISION App will flip if the mobile device’s auto-flip is enabled.
[8] Battery Low Warning
If enabled, an alarm will sound when the battery level is too low.
[9] Tutorial
Hints and Tips
[10] Clear News Cache
Tap to flush news cache.
[11] Binding
In the event that camera and Range Extender binding is lost or an item has been repaired or replaced, binding
must be performed using the DJI VISION App. Refer to Binding the Phantom 2 Vision+ and Range Extender
(Page 31) for details.
[12] Rename SSID of Range Extender
Tap to rename the SSID of the Range Extender. Refer to Renaming the Range Extender SSID (Page 30) for
details.
To Next Page
Loading...
