dji PHANTOM 2 VISION+ - Page 70

©2014 DJI. All Rights Reserved.
DO NOT disconnect until configuration is finished.
3. Run the PHANTOM RC Assistant Software and wait for the Remote Controller to connect to Assistant
Software. Watch the indicators on the bottom left of the screen. When connected successfully, the
connection indicator is and communication indicator blinks .
4. Finish configuration in the [Main] page.
5. Finish upgrade in the [Info] page if necessary.
Language swap
Main page
Connection indicator
Communication indicator
Firmware upgrade
Account, software
version
*This image is for
reference only. Please
refer to the actual
user interface.
Figure 106