Digital Monitoring Products XR500 Series Installation Guide
60
REVISIONS
Revisions to This Document
This section explains the changes that were made to this document during this revision. This section lists the
version, section number with heading, and a quick summary of the change.
Version Section Number and Heading Summary of Changes
1.29 11.2 Compatible 2-Wire Smoke Updated to current devices
Detector Chart
36.21 System Sensor i4 Series Smoke Added Wiring Diagram
and CO Detectors Using A Single
COSMOD2W Module
36.22 System Sensor i4 Series Smoke Added Wiring Diagram
and CO Detectors Using Multiple
COSMOD2W Modules
1.28 1.5 LX-Bus Added Model 2W-BLX and 2WT-BLX Smoke Detector references
3.4 Accessory Devices Added Model 2W-BLX and 2WT-BLX Smoke Detector references
6.8 XR500 Series Power Requirements Added Model 2W-BLX and 2WT-BLX Smoke Detector references
1.27 Complete Guide Added 464 Series References
3.4 Accessory Devices Updated for current product
6.8 XR500 Series Power Requirements Updated for current product
24.10 CELL Only, Standard or Added 464-263C, 464-263H
Encrypted Line Security
24.11 NET with CELL as Alternate Added 464-263C, 464-263H
Primary and Dialer Backup,
Standard or Encrypted
Line Security
24.12 NET with CELL as Backup and Added 464-263C, 464-263H
Adaptive Primary, Standard or
Encrypted Line Security
1.26 6.1 Battery Terminal 3 and 4 Updating model 368
6.9 Standby Battery Selection Updating model 368
21.14 Standby Batteries Updating mosel 368
1.25 21.8 Listed Receivers Claried listed receivers for contact ID
30.12 Listed Receivers Claried listed receivers for contact ID
Listings and Approvals Added California Stare re Marshal (CSFM)
1.24 3.2 Wiring Diagram Add 734 to Wiring Diagram
32.6 Wireless External Contact Removed 1101, 1102, and 1105 section
To Next Page
Loading...
Need help?
General
