Dodge Stealth 1994 - Distributor Disassembly and Reassembly

8-262
ENGINE ELECTRICAL - Ignition System
DISTRIBUTOR
DISASSEMBLY AND REASSEMBLY
Disassembly steps
1. Distributor cap
2. 0-rina
2
I
‘d
3. Contact carbon
4. Rotor
5. O-ring
6. Housing &crankshaft position sensor
assembly
7EL0103
INSPECTION
Check the following points; repair or replace if a problem is
found.
CAP AND ROTOR
(1) There must be no cracking in the cap.
(2) There must be no damage to the cap’s electrode or the
‘d
rotor’s electrode.
(3) Clean away any dirt from the cap and rotor.
CAMSHAFT POSITION SENSOR, CRANKSHAFT POSITION
SENSOR
Refer to GROUP 14 - On-vehicle Inspection of MFI Compo-
nents.