CHASSIS ELECTRICAL
-
Radio and Tape Player
8-383
A-7 Some noise appears when there is vibration or shocks during traveling.
Are connectors properly connected? Ensure proper connection
Yes
oes noise appear when the radio switch is
turned on while the vehicle is stopped and the
radio is struck while tuned away from a station?
No
/
Yes
Static electricity noise:
Body static electric from the shock
absorber rubber bushings used to
prevent vibration, tires, etc. occurs
because of separation from the
ground, causing a buzzing noise.
Since no measures can be taken on
the radio side, steps should be taken
to discharge the static electricity
of the vehicle body.
,
Is the radio correctly grounded?
(Is
the mounting screw tightened securely?
)
Yes
Tighten the screw securely.
Is the antenna correctly grounded? (If noise
appears when the antenna is moved, this means
the ground is not securely connected.)
Yes
No
If rust is present on the antenna
>
ground screw, clean and tighten
the ground securely.
L,
Repair-