Dodge Stealth 1994 - Security Light Activation Circuit; Horn Relay Power-Supply Circuit

i 8-426
CHASSIS ELECTRICAL - Theft-alarm System
8. SECURITY LIGHT ACTIVATION CIRCUIT
[#RB E
b
Description of operation
If all doors are in locked state after key-less locking, the ECU
transistor is turned ON and the security light comes on.
Checking the security light activation circuit (Disconnect the
connector of the ECU and check at the wiring harness side.)
!iPBR!%
CONNECTOR
157
ECU
C-66
9. HORN RELAY POWER-SUPPLY CIRCUIT
Gtep
Check object
Judgement
Normal Mal-
function
Cause
Remedy
1
D-04 connector
12v ov
terminal voltage
Fuse @damaged
Replace the
or disconnected
fuse
51
Harness damaged
Repair the
or disconnected,
harness
or short-circuit
2
D-04 connector
12v
ov
terminal voltage
Damaged or
Replace the
disconnected
bulb
52
wiring of
fSE$jRITY light
Harness damaged
Repair the
or disconnected harness
3
ECU terminal 12v ov
voltage 57
Harness damaged
Repair the
or disconnected, harness
or short-circuit
FUSIBLE LINK0
DEDICATED
FUSE
m
d:
I
0
T
Fp
=,,1 9,5
---___-_____c_-_
O&;-OFF
3 4
Description of operation
Power voltage is always supplied to the horn relay.
Checking the horn relay power-supply circuit (Disconnect the
horn relay)
Check object
Judgement
Cause Remedy
Normal Mal-
function
HORN RELAY
12v ov Dedicated fuse @ Replace the fuse
connector
terminal voltage
damaged or
disconnected
5
Damaged or
Repair the harness
Efryeysected
I
Ld:
I
I
d
TO
t +
THE ECU
TO THE HORN
KXOZI-AC-RWOQ-N4