Dodge Stealth 1994 - Continuity Check

8-36
HOW TO DIAGNOSE
/
Self power test light
(or ohmmeter)
10A02.59
3. CONTINUITY CHECK
(1) When the switch is in the OFF position, the self power
test light should come on or the ohmmeter should read
0 ohm only when the terminals 1 and 2 are intercon-
nected.
(2) When the switch is in the ON position, the self power
test light should come on or the ohmmeter should read
0 ohm only when the terminals 3 and 4 are intercon-
nected.