Dodge Stealth 1994 - Ignition Switch Removal and Installation; Removal of Steering Wheel

8-268
CHASSIS ELECTRICAL - Ignition Switch
IGNITION SWITCH
SPECIAL TOOL
Tool number and tool name
Replaced by Miller tool number
Application
MB990803
General service tool Removal of steering wheel
Steering wheel
puller
IGNITION SWITCH
REMOVAL AND INSTALLATION
40 Nm
29 ftlhn
Before removal
of air bag
module,
refer to GROUP 23B - SRS Service
Removal steps of ignition switch segment
3. Knee protector
(Refer to GROUP 23A- Instrument Panel.)
4. Column cover lower
5. Column cover upper
6. Lap cooler duct and foot shower duct
10. Key reminder switch segment
11. Ignition switch segment
Removal steps of steering lock cylinder
1. Air bag module (Refer to GROUP 23B -
Air Bag Module and Clock Spring.)
+I)
2. Steering wheel
3. Knee protector
(Refer to GROUP 23A- Instrument Panel.)
*I)
4. Column cover lower
4*
5. Column cover upper
6. Lap cooler duct and foot shower duct
w 7. Column switch and clock spring assembly
8. Ignition key illumination ring
l *
9. Steering lock cylinder
I-
SERVICE POINTS OF REMOVAL
2. REMOVAL OF STEERING WHEEL
Remove the steering wheel by using the special tool.
Caution
Do not hammer on the steering wheel to remove it;
doing so may damage the collapsible mechanism.
I
L.)
I
I