Dodge Stealth 1994 - Cigarette Lighter Removal and Installation

CHASSIS ELECTRICAL - Cigarette Lighter
8-365
CIGARETTE LIGHTER
REMOVAL AND
INSTALLATION
Removal steps
1.
Console side
2.
Plug
3.
4.
Fixing ring
Socket case
5.
Plate
6.
Socket
7.
Protector
cover
WI)
16FO274
INSPECTION
l Take out the plug, and check for a worn edge on the
element spot connection, and for shreds of tobacco or
other material on the element.
l Using an ohmmeter, check the continuity of the element.
~
CAUTIONS FOR USE OF THE CIGARETTE LIGHTER SOCK-
ET AS AUXILIARY POWER SOURCE
1.
2.
When using a “plug-in” type of accessory, do not use
anything with a load of more than 120W.
It is recommended that only the lighter be inserted in
the receptacle.
Use of “plug-in”
type accessories may damage the
receptacle and result in poor retention of the lighter.
NOTE
The specified load should be strictly observed, because
overloaded cord burns the ignition switch and harness.
,
L