Dodge Stealth 1994 - Dash Panel; How to Read Configuration Diagram

CONFIGURATION DIAGRAMS - How to Read Configuration Diagram
8-39
HOW TO READ CONFIGURATION DIAGRAM
The wiring harness diagrams clearly show the connector locations and harness routings at each site on actual
vehicles.
ii
Denotes connector No.
The same connector No. is used throughout the circuit
diagrams to facilitate connector location searches.
The first alphabetical symbol indicates the location site of the
connector and a number that follows in the unique number.
Numbers are assigned to parts in clockwise order on the
diagram.
In case connectors of the same shape (same number of poles)
are located close to each other, connector colors are shown to
aid in identification.
Example: A-l 2
/L
Number specific to connector (serial number)
Connector location site symbol
A: Engine compartment
B: Engine and transaxle
C: Dash panel
D: Instrument panel and floor console
E: Interior
F: Luggage compartment
L
1 I
\\
F-34 F-d
,\
///,
F:Zl
F-31
/
F-2/5 F-:4
36FOO12
Denotes a section covered by
a corrugated tube.
Denotes ground point.
Same ground number is used throughout
circuit diagrams to facilitate search of
ground point. Referto GROUNDING
LOCATION for details of ground points.