DOGA DPC TOUCH V2 - Page 12

User manual DPC Touch V2 DOC.60352-11/20
12
User interface
Positioning tolerance
Adjustable for each position and for each axis.
Smart tolerance detection feature.
Compatible tools
All tool with signals – electric or pneumatic.
Min required tool I/O: «Driver Torque Up»
output, «Tool Disable» input. A «Driver Run»
from the tool allows access to certain functions.
Communication
RS232 for bar code scanner
and firmware upgrade
Ethernet (Modbus TCP/IP)
Languages
French
English
Spanish
Portuguese
Italian
German
Russian
Czech
Polish
Protection rating
Protection rating IP
IP 4X
Equipment protected against intrusion of solids
larger than 1 mm