Rev 00
Dr.coffee Product Maintenance Manual 30
7.1.4.11 Grounds
Set the weight of ground coffee powder when making coffee, unit: G, setting range: 6~21. The coffee machine needs to be calculated after the grinding amount calibration. In case of
any difference, the actual value shall prevail.
Take powder:Click the button, weight the coffee powder in ground box, it’s the real coffee powder weight of this drink.
7.1.4.12 Pre-brewing(s)
The coffee powder pre-soaking time, unit: S, setting range: 0~5
7.1.4.13 Coffee(ml)
The amount of coffee flowing out, unit: ml. Setting level: See the screen numerical on the interface, different beverage with different beverage value limits.
Take water:Click the button, weight the water, it’s the real water weight of this drink.
7.1.4.14 Bean box select
Means which coffee bean for grinder.
Range: Left bean box, right bean box, Grind beans at the same time.
7.1.4.15 Temp. level
The temperature of drinks
Range: Low, Medium, High
7.1.4.16 Pressure Mode
Means if need brewer pressure when making drinks.
Range: Under pressure, no pressure
7.1.4.17 Extraction
Means the difference of extraction. Range: Standard, Strong, Extra-strong.
Standard: When make coffee, water pump works at full frequency and accord to common extraction method.
Strong:When make coffee, water pump works intermittently, the extraction time will be longer under the same cup.
Extra-strong: When make coffee, water pump works intermittently, the extraction time will be longer than strong extraction under the same cup.
7.1.4.18 Total Water Volume(ml)
Means the water volume to match with the powder weight, unit: ml
Range: Please refer to the drinks parameter of the interface.
Take water: means the real water volume.
7.1.4.19 Powder Weight(g)
Means the powder weight from the powder box. Unit: g
Range: Please refer to the drinks parameter of the interface.
Get powder:means the real powder weight.
7.1.4.20 Front Water Outlet(ml)
Means the water before mixing powder.
Range: Please refer to the drinks parameter of the interface.