Rev 00
Dr.coffee Product Maintenance Manual 45
Warm Milk Air Intake Control
Set the air volume when making warm milk. Option: 1-10. The bigger the number, the more air. Default: 3
Warm Milk Foam Air Intake Control
Set the warm milk foam air volume when making warm milk foam. Option: 1-10. The bigger the number, the more air. Default: 3
Cold Milk Air Intake Control
Set the cold milk air volume when making cold milk. Option: 1-10. The bigger the number, the more air. Default: 3
Cold Milk Foam Intake Control
Set the cold milk foam air volume when making cold milk foam. Option: 1-10. The bigger the number, the more air. Default: 3
Milk Cup Air Intake Control
Set the milk cup air volume when making milk cup. Option: 1-10.The bigger the number, the higher the solid ratio. Default: 3
Refrigerator Position
Set the position for refrigerator based on actual condition. Option: On the table, under the table.
Length of Milk Tube(cm)
Set the length. Optional: 50-130cm. Based on actual condition
Milk Temperature Testing
Click“ ”icon, turn on or turn off this function.(Green means turn on, dark means turn off）
Milk Temperature Alarm Temperature Threshold Setting（℃）
Optional: 8-15
Lack of Milk Warning Switch
Click“ ”icon, turn on or turn off this function.(Green means turn on, dark means turn off）
Milk Box Temperature（℃）
Set the milk box temperature（This function not available currently）
Milk Calibration
Click”Start”, milk come out
Milk Calibration（g）
Insert actual milk weight, click “Save”
Method of water calibration（A rate formed by the actual measured milk and expected milk to reduce the error of milk.）
Step 1: Click”Start”, the first data will not be recorded.
Step 2: Take a measuring cup(at least 200ml), weight and under the outlet.
Step 3： Click “Start”
Step 4: Waiting the milk finish.
Step 5: Weight the milk and record in machine, click “Save”.
To Next Page
Loading...
