Dräger Infinity Acute Care System - Accessing the Cco;Svo2 Setup Pages; Svo2 Setup Functions; Accessing the Cco;Svo2 Setup Page

Instructions for Use Infinity Acute Care System - Monitoring Applications SW VG1 271
External Device - Continuous Cardiac Output (CCO)
Accessing the CCO/SvO2 Setup Pages
1 Select the Sensor parameters... button from
the main-menu bar
2 Select the CCO tab If you cannot see the tab,
select the following two symbols located in the
upper-right corner of the dialogue window:
symbol and the display filter button
SvO2 Setup Functions
Selection Available Settings Description
Parameter 1 SVO2 (default), Tblood, CCO, CCI, VO2,
DO2, SaO2, SVR, SVRI, EDV, EDVI, ESV,
ESVI, EF, SV, SVI, SVV
Selects the primary parameter
in the CCO parameter box.
Parameter 2 SVO2, Tblood, CCO (default), CCI, VO2,
DO2, SaO2, SVR, SVRI, EDV, EDVI, ESV,
ESVI, EF, SV, SVI, SVV
Selects the second parameter
in the CCO parameter box.
Parameter 3 SVO2, Tblood, CCO, CCI, VO2, DO2, SaO2,
SVR (default), SVRI, EDV, EDVI, ESV, ESVI,
EF, SV, SVI, SVV
Selects the third parameter in
the CCO parameter box.
Colour Red, green, blue, yellow, light blue, purple,
orange, white (default).
Determines the colour of the
parameter box.