Instructions for Use Infinity Acute Care System - Monitoring Applications SW VG1 53
Operating Concept
Views
Each Cockpit supports eight pre-configured Dräger
views and, as an option, up to eight custom views.
Views control the content and the appearance of
the screen.
During a monitoring session, you can always switch
to a different view to adjust the screen layout to the
needs of the current monitoring session.
Views can be shared among various profiles which
are pre-configured setups. This sharing of views
eliminates time-consuming setup tasks. You can
also assign views to each profile (see page 308).
Selecting a View
You can reconfigure the screen by selecting a
different view.
To select a view
1 Select the Views... button on the main-menu
bar.
2 Select the Views tab if it is not already selected
to open a popup with pre-configured views.
3 Select the desired View from the Custom
views (option) or the Dräger views selection
lists.
The monitoring area is configured accordingly.
The View Editor
The view editor (option) allows authorised
personnel to create and modify customised views.
Dräger views cannot be modified. Access to the
view editor is password-protected. For more
information, see page 283.
To Next Page
Loading...
