Index Page:
3. Transport carriage
3.1 Rearendposition.............................................. 55
3.1.1 Positionofthelimitswitchintheslottedhole............................. 57
3.1.2 Distancebetweenswitchingscrewandlimitswitch.......................... 57
3.1.3 Stopguidefortransportcarriage..................................... 57
3.2 Changing the toothed belt ......................................... 58
3.3 Adjustingthebelttension......................................... 60
4. Feeding clamps
4.1 Measuring line for aligning the feeding clamps and the folder ................... 61
4.2 Aligning the feeding clamps as to the auxiliary line .......................... 62
4.3 Feeding clamp stroke ........................................... 63
4.4 Distance between the feeding clamps and the sole of the folder .................. 64
4.5 Front end position of the feeding clamp................................. 66
4.6 Device for blowing the piping strip / pocket bag for 745-34-2 A/B/F ................ 67
5. Knives for corner incision
5.1 Presetting .................................................. 68
5.2 Belttension ................................................. 69
5.3 Aligningthecornerknifestationastotheseams........................... 70
5.4 Adjustingtheslantofthecornerincisions............................... 72
5.5 Cornerknifeadjustments......................................... 73
5.6 Exchanging the corner knives ...................................... 74
6. Laser markings
6.1 Aligningthemarkings ........................................... 76
7. Reflected light barriers for flap scanning
7.1 Swivelarm.................................................. 78
7.2 Aligningthelightbarriers......................................... 79
7.3 Aligning the air nozzles for c leaning the reflected foil ........................ 80
8. Aligning the folding station plate as to the measuring line ................... 81
9. Positioning the sew ing machine head as to the table top .................... 82
10. Fabric sliding sheet and vacuum plate
10.1 Adjustingtheheightofthevacuumplate................................ 83
10.2 Aligning the fabric sliding sheet as to the throat plate ........................ 84
11. Folder (Working method A)
11.1 Proper fastening............................................... 85
11.2 Aligning the folder as to the middle of the pocket opening ...................... 86
11.3 Liftingmotionofthefolder......................................... 87
11.4 Position of the folder to the needles and to the center knife..................... 89
11.5 Aligningtheguideplatesatthefolder.................................. 90
11.6 Recognition of the folder.......................................... 91
To Next Page
Loading...
Need help?
General
